1/2 Crimpex X 1/4 OD Comp, Angle, Rough Brass
Product Type Supply Stop
Inlet Pipe TypePEX
Outlet Pipe TypeCopper
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.
Specifications
Material Lead-Free Brass
Inlet Size 1/2
PatternAngle
Inlet ConnectionPEX Crimp
FinishRough Brass
OperationPlated Handle
Outlet Size1/8
InletPX3
Outlet Connection1/4 OD Comp
Outlet30
Box / Case24 / 144
Instructions
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
CRIMPEX (Crimp for PEX): Follow tube manufacturer’s instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer’s instructions; Special ring, nut, or insert may be required.
